Subsurface Instruments AquaTrac 300 Leak Detector
Typically ships FREE in 2-4 business days
Accurately locate leaks with the Aqua Trac 300
The Aqua Trac 300 can identify which pipeline is leaking AND pinpoint the leak location. This device is Subsurface Instruments’ second-generation water leak locator and offers an upgraded piezo electric microphone, touch screen with graphing capabilities, and pre-defined filters. This advanced leak detection solution was built for experienced plumbers, contractors, and utility maintenance personnel.
Save Time, Money, and Frustration: pinpoint BEFORE you dig
The Aqua Trac 300 is a computerized microphone listening device. Through its sensitive ground microphone, leak noises can be heard directly through a pipeline as well as on the ground surface. The louder the noise, the closer you are to the leak. The noise level is displayed on the screen numerically and can be graphed to help you to locate leaks fast and with confidence.
Filter out unwanted noise
Are your leak locations in areas with high background noise? The Aqua Trac 300 amplifier design includes three pre-set frequency filters and an unlimited number of adjustable frequency filters. This allows the operator to screen out the hum from traffic, transformers, power lines, and other background noises. The noise frequency selections are displayed on the graph of the amplifier's touch screen. The headphones are equipped with noise isolating features that allow the user to block outside noises and to concentrate on the job at hand.
Identify the leaking line
Operators can use the contact rod or magnet attachments on the microphone to listen for system water leaks at hydrants, meters, valves, or anywhere the pipeline can be contacted directly. The louder the sound of the leak, the closer you are to the break.
Then pinpoint the leak
Once the section of line with the leak has been identified, the contact rods can be removed from the ground microphone. The operator can then work down the identified length of the pipeline listening for the leak directly through the ground surface. The microphone has been optimized for listening through pavement and concrete slabs, but it can also be used on grass or dirt by inserting the contact rod into the ground above the buried line. As with the leak survey, the louder the sound of the leak, the closer you are to the break in the line. The meter on the amplifier allows for direct measurement of loudness.
The Aqua Trac 300 is built for tough work
You work hard. Your equipment needs to be just as tough. The Aqua Trac 300 leak detector is shock protected and waterproof certified to an Ingress Protection Level IP65. This means that the unit is dust proof AND water resistant.
The rechargeable Li-Ion internal battery allows up to 20 hours of continuous use which means you can keep working all day without stopping to recharge or replace the battery.
In the Box
- Aqua Trac 300 Amplifier.
- Microphone with 5ft cable.
- Koss headphones with a 3.5mm jack.
- Microphone with 3-point ground plate.
- Microphone magnet.
- Hand-held sound cut-off trigger for amplifier.
- Three section collapsible contact rod.
- Li-ion battery charger.
- Shoulder strap.
- User Manual.
- ABS hard plastic carry case.
Aqua Trac 300 Technical Specifications
|
Amplifier Size |
6" x 5" x 4" |
|
Amplifier Weight |
1.0 lb |
|
Amplifier Input Power |
Li-Ion Rechargeable Battery |
|
Amplifier Battery Life |
up to 20 hours of continuous use |
|
Amplifier Frequency Range |
0 Hz to 5120 Hz |
|
Amplifier Amplification |
65 dB ±/- 4 % |
|
Amplifier Warranty |
5 Years |
|
ABS Carrying Case Size |
20" x 17" x 8" |
|
ABS Carrying Case Weight |
15 lbs |
|
LCD Display |
Full-color Display |
|
LCD Type |
Touch Screen |
|
LCD Size |
4.25 inches |
